You are here:Home > Outdoor/Indoor Banner Media by IJ Technologies > DG Poly Banner II
Sort By:
Page of 1
DuraGraphix 10 Mil Economy Poly Banner II 24 in X 5 ft- Sample Roll  NOT AVAILABLE DuraGraphix 10 Mil Economy Poly Banner II 24 in X 50 ft- Roll DuraGraphix 10 Mil Economy Poly Banner II 36 in X 50 ft- Roll
DuraGraphix 10 Mil Economy Poly Banner II 24 in X 5 ft- Sample Roll. A Tough Polyethylene base for outdoor and indoor banners. Overnight Drying Recommended. DuraGraphix 10 Mil Economy Poly Banner II 24 in X 50 ft- Roll. A Tough Polyethylene base for outdoor and indoor banners.Overnight Drying Recommended. DuraGraphix 10 Mil Economy Poly Banner II 36 in X 50 ft- Roll. A Tough Polyethylene base for outdoor and indoor banners.Overnight Drying Recommended.
DuraGraphix 10 Mil Economy Poly Banner II 42 in X 50 ft- Roll DuraGraphix 10 Mil Economy Poly Banner II 44 in X 75 ft- Roll DuraGraphix 10 Mil Economy Poly Banner II 50 in X 50 ft- Roll
DuraGraphix 10 Mil Economy Poly Banner II 42 in X 50 ft- Roll. A Tough Polyethylene base for outdoor and indoor banners.Overnight Drying Recommended. DuraGraphix 10 Mil Economy Poly Banner II 44 in X 75 ft- Roll. A Tough Polyethylene base for outdoor and indoor banners.Overnight Drying Recommended. DuraGraphix 10 Mil Economy Poly Banner II 50 in X 50 ft- Roll. A Tough Polyethylene base for outdoor and indoor banners.Overnight Drying Recommended.
   
 

DuraGraphix™ Poly Banner II

Product Description:

A tough polypropylene base for outdoor display.

 x  

Suggested Uses:

Outdoor Signs, Banners, Posters

x  

Product Code:

DGVP

x    

Roll Dimensions:

Width (inches)

Length (feet)

On 2” cores unless noted.

24

50

 

36

50

 

42

50

 

44

50

 

50

50

     
 

24” x 5’ sample rolls or 8.5” x 11” sample sheets are available

x  

Physical Properties:

Total Weight

270 g/m²

 

Thickness

10 mil

 

Opacity

86%

 

Gloss @ 60°

White Point

2.7

122

 

Base

8 mil polyethylene

 

Tensile Strength (N/mm²)

45 MD; 38 CD

 

Tear Strength (N/mm²)

140 MD; 170 CD

 

Lamination

Pressure Sensitive, Spray, Thermal, Liquid

For best results, please ensure that the print is encapsulated or the edge is sealed to prevent moisture wicking into the print.

 

Finish

Matte

 

Water Resistant

Yes

x  

Ink Compatibility:

Aqueous Pigment (recommended for image permanence), Ultrachrome, Dye-based, Eco-Solvent

x    

NOTE:

This Product Data Sheet is intended to be used as a guideline only. Before using our print media, please verify that it is suitable for use with your printer. IJ Technologies will not assume liability for non-performance of the print media resulting from changes beyond our control in printing inks and/or printers.

Specifications are subject to change without notice. The product will be replaced if defective. No other liability will be accepted and all other warranties and conditions statutory, expressed or implied are excluded.